The Motorola Canopy 5.4 GHz Access Point Module (AP) Module operates with a raw data rate of 10 Mbps and has a range of approximately ten miles (5.4 GHz SM with reflector). Each AP requires a 24-volt power Configuration Guide source and uses a single 10/100 BaseT Half/Full duplex connection to interface into the CMM or appropriate network connection.
Description
5.4 GHz Access AP AES
Canopy Part Number
5401AP
Signaling Rate
10 Mbps
Typical LOS Range
2 mi (3.2 km)
Typical Aggregate Useful Throughput
7 Mbps
Frequency range of band
U-NII 5470-5725 MHz
Channel Width
20 MHz
Channel Spacing
every 5 MHz
Modulation Type
High Index 2-level Frequency Shift Keying (FSK) optimized for interference rejection
Encryption
AES capable
Latency
15 msec
Carrier to Interference ratio (C/I)
3 dB
Nominal Receiver Sensitivity (dbm typical)
-86
Antenna Gain (dB)
7
EIRP, dB
30
Equivalent Isotropic Radiated Power (EIRP)
Adjustable to 1 W
DC Power (typical)
0.3 A @ 24 VDC = 7.2 W
Mean Time Between Failure
40 yr
Antenna Beam Width
3 dB antenna beam width 60 degrees, Azimuth and Elevation
Temperature
-40° C to +55° C (-40° F to +131° F)
Wind Survival
190 km/hr (118 miles/hr)
Dimensions
11.75 in H x 3.4 in W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6 cm D)
Access Method
Time Division Duplex/Time Division Multiple Access (TDD/TDMA)
Interface
10/100 Base T, half/full duplex. Rate auto negotiated (802.3 compliant)
Protocols Used
IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP
Network Management
HTTP, TELNET, FTP, SNMP Version 2c
