| Canopy Part Number |
BP5730BHC20-2BB |
| Description |
5.7 GHz 30 Mbps Backhaul Module Pair - Connectorized |
| Market Availability |
North America, Europe, South America, Asia |
| Signaling Rate |
30 Mbps |
| Typical LOS Range |
non-LoS Up to 6 Miles (10Km),near-LoS up to 25 Miles (40Km),LoS Up to 124 Miles (200Km) |
| Typical Aggregate Useful Throughput |
Dynamically variable modulation ranges from 1.5 Mbps to 21 Mbps. (Upgradeable to 60 Mbps via Software License Key) |
| Frequency range of band |
5.725 GHz–5.850 GHz |
| Channel Width |
12 Mhz |
| Modulation Type |
Adapting between BPSK and 64QAM – (8 Modes). Signal is transmitted and received with multiple beams on separate routes – recorrelates signals and brings multi-path signals into phase. Generates a new set of Adaptive Modulation margins which reduces the probability of codeword errors (and hence packet loss). TDM mode. |
| Encryption |
Proprietary scrambling, optional AES 128 Bit Encryption |
| Latency |
7ms |
| Nominal Receiver Sensitivity (dbm typical) |
Adaptive, varying between -96.5 dBm and -72 dBm according to modulation selected |
| Antenna Gain (dB) |
Approved to operate with flat plate up to 28 dBi, dish up to 37.7 dBi |
| EIRP (dB) |
Adaptive. Varying between 25 dBm and -10 dBm according to modulation selected and radio path. Power Source 90-240 VAC, 50-60 Hz/36-60V DC. Power consumption 55W maximum. |
| Temperature |
-40° C to +60° C (-40° F to +140° F) including solar radiation. |
| Wind Survival |
242 km/hr (150 miles/hr) |
| Dimensions |
Outdoor Unit: 12W x 12H x 4.1D inches (305 x 305 x 105 mm). Indoor Unit: 9.85W x 1.6H x 3.1D inches (250 x 40 x 80 mm) |
| Weight |
Outdoor Unit: 9.1 lbs (4.1 kg) including bracket |
|
Indoor Unit: 1.9 lbs (864 g) |
| Interface |
10BASE-T / 100BASE-T (RJ-45) – auto MDI/MDIX switching |
| Protocols Used |
IEEE 802.3 compatible |
| Network Management |
Web Server and SNMP |
