PowerDsine PD-AS-801 High Power Splitter is installed in conjuction with the PowerDsine 8012/8006/8001 High Power Midspans to power legacy terminals with non-standard power characteristics as defined by the IEEE 802.3af standard, i.e. non 48Vdc input and more then 12.95W power consumption. The PD-AS-801 splitter receives one data and power input cable from the High Power Midspan and seperates them into two outputs, terminating at a power port and RJ-45 jack.  The active splitter supplies a totally secure power source, keeping the Ethernet device fully protected against any misuse or mistaken connection. High Power Splitter Specifications

Parameter Description Input Power Requirements RJ-45 Data and 48V power input on spare and data pairs Outputs RJ-45 Data Output connector DC Voltage 12V output (DC connectors: 5.5x3.3x1 and 5.5x2.5) Output Power continuous: 22W Output Power Peak: 26W (up to 10 sec.) Detection Mechanism IEEE 802.3af signature on bot Data and spare pairs Efficiency Min 73% Dimensions 1.75 x 3.0 in x 4.8 in. (h * w * d) 33 x 75 x 120 mm (h* w * d) Environmental Conditions Operating Ambient Temeprature: 32° to 104°F (0 to 40°C) design to 50°C Operating Humidity: Maximum 93%, non-condensing Storage Temperature: –14.4° to 158°F (–40° to 70°C) Operating Altitude: –1000 to 10,000 ft.(–304.8 to 3048 m) Regulatory Compliance CE Electromagnetic Emission & Immunity FCC Class B Part 15 with FTP cabling EN55022 (CISPR 22)class B with FTP cabling EN55024 (CISPR 24) Safety Approval UL/cUL per EN 60950 GS Mark per EN 60950