The Tsunami QuickBridge II 40 +2xT1/E1 Link provides unsurpassed ease of use for Enterprises and Service Providers needing a quick and effective point-to-point solution. Everything needed for the complete link is provided in a single box, including two weatherized radios with integrated directional antennas, cables, mounting hardware, and software. Operating in the unlicensed 5.8 GHz frequency band, Tsunami QuickBridge II provides quick time-to-market deployment with an audible antenna alignment system. For hubbing applications, Tsunami QuickBridge II can be co-located with several other QuickBridge II radios using an optional GPS synchronization antenna. Robust management is available through the use of standards-based management for integration into existing network management platforms. Proxims years of carrier-class experience set the bar for usability and functionality. |
Voice and Data Connectivity Made Simple- Co-location of multiple QuickBridge II radios increase capacity, extends range and provides network redundancy between locations
- Available with two integrated T1/E1 voice channels for low-cost voice transmission
- Built-in SNMP support and QuickBridge Manager software allow flexible management of local and remote radios
| Designed for Complete Ease of Use
Tsunami QuickBridge is the easiest-to-install family of broadband wireless bridges on the market. Requiring no training or wireless experience, they can be set up and installed within hours. Each solution includes everything you need to set up a link right out of the box. - Hop-in-a-box solution includes two radios with integrated antennas, cables, mounting hardware, power supply and documentation
- Easy to use software enables fast configuration
- Audible tones ensure antennas are properly aligned
Cost-effective Connectivity
The Tsunami QuickBridge family offers the best price performance for campus networking and backhaul applications. Supporting voice and data transmission, they can easily replace T1/E1 or DS-3 connections with a payback of less than one year. - Capacity from 6 to 54 Mbps supports enterprise and service provider bandwidth-intensive applications
- Connectivity for buildings located up to 6 miles away
- Synchronous voice channels available for low cost PBX extensions
Flexibly Manage Your Entire QuickBridge Network
Designed for outdoor networks, Tsunami QuickBridge management tools enable network managers to view and proactively maintain all radios located throughout multiple facilities. In contrast to leasing lines, network ownership gives managers complete visibility into local and remote bridges. - Built-in SNMP support and web-based QuickBridge Manager simplify remote java-based management and integrate easily into existing network policies
- Proactive alarm notifications enable network managers to maximize network performance
|
Secure & Reliable
A wireless alternative to a wired network provides greater control over network quality. Backed by more than 20 years of wireless design innovation, Proxim's Tsunami QuickBridge solutions offer the highest security and reliability available in networking today. - Up to 99.995% RF link availability
- Meets or exceeds wired network security
- Proprietary Link ID provides secure wireless transmission
Proxim Tsunami QuickBridge II Specifications Aggregate
Throughput | Channel Plans | Treshold
(BER=1X10-6) | EIRP Output Power | System Gain
(Including Antenna) | Distance
(Miles/KM) | 34 Mbps1 | 7 | - 81 dBm | +36 dBm | 137 dB | Up to 4 miles/6 Km |
| Radio Characteristics | Channel Plan | Frequency | Channel Plan | Frequency | | Frequency Plans | 3A | 5740.401 MHz | 4A | 5743.85 MHz | | 3B | 5774.984 MHz | 4B | 5764.60 MHz | | 3C | 5809.568 MHz | 4C | 5785.35 MHz | | | | 4D | 5806.10 MHz |
Frequency Band | 5.725 5.825 GHz | Transmit Output Power | +16 dBm max; +15 dBm typical | Antenna | Integrated LHCP; 20dBi, 10° azimuth by 10° elevation | Maximum Receive Level | -20 dBm error free | Latency | 2.5 msec typical, 5 msec maximum | Access Method | Time Division Duplex | Modulation Technique | QPSK with equalization and FEC | Security Key | 16 Character Security ID (Alphanumeric); authentication and PN transmission; scrambling | Compliance | US: FCC Part 15.247 ISM; Canada: IC RSS 210; Model 40100-25 | Data Interface | Ethernet Interface | 10 /100BaseT via AC power adapter | Connector | RJ-45 female modular plug w/ weather-protected shell | Cable Type | CAT5 | QBII 40 2XT1/E1 Wayside Interface T1 E1 | Connector | Connector RJ- 48C female modular jack Balanced RJ-48C female modular jack | Compliance | ANSI T1.403 G.703 | Management | Local, Remote Access | QuickBridge Manager (Java-based GUI) for discovery, status, and configuration; SNMPv2 embedded in radio with Enterprise MIB II | Software Upgradeable | Over-the-air reprogramming | Security | 2-level password access on Manager | Electrical Specifications | AC Power | Adapter included, 110 VAC or 220 VAC, 450mA; Output: 28V DC, 0.6 A | DC Power (to unit) | +18 +28 VDC | Power Connector | Power Connector | Environmental Specifications | Operational Temperature | -25°55° C | Storage Temperature | -55° 85° C | Humidity | 5100% condensing | Altitude | Up to 15,000 ft | Wind Loading | 115 mph | Physical Specifications | Dimensions | 10.5 x 10.5 x 4.5 in; 26.5 x 26.5 x 11.3 cm | Weight | 10 lbs /4.5 kg | Mounting (Installation) | Pole Mount (hardware included for 1.5 3.0 in/3.8 7.6 cm O.D) | | Package Contents | | 2 QuickBridge Radio Units, 2 sets mounting hardware, 2 power adapters, 2 sets 50 meter Cat5 cable, 2 sets user documentation & 1 CD-ROM with user documentation and QuickBridge Manager software |
|
|
