The Model AMP2441-I is a bi-directional indoor amplifier for use with 2.4 GHz Spread Spectrum radio modem and wireless LAN equipment. Consisting of a low noise receiver pre-amplifier and transmit power amplifier, the AMP2441-I offers significant increases in operating range and performance. The unit is ideal for use with 2.4 GHz Frequency Hopping or Direct Sequence Spread Spectrum radio modems and Wireless LAN devices.
This version of the amplifier is ideal for use in any application where the total cable length from the radio coax to the antenna is short, but amplification is needed.
- Mobile installations where 12VDC battery voltage is available.
- Installations where the radio and the amplifier are both mounted in a weatherproof outdoor enclosure located near the antenna.
- Indoor installations where some extra gain is needed but the outdoor pole mounted amplifier is not practical.
- Installations where the antenna cable is short and the amp is protected from the weather.
Features
- Transmit input levels from 10mW to 100mW
- 16 dB transmitter power gain (to a maximum 30 dB)
- Low noise receiver pre-amp with 12 dB gain
- No DC injector needed
- DC Power jack on the amplifier itself
- Power and Transmit LEDs on the amp
- Built-in Lightning Protection
- DC Surge Protection
- Heavy Duty N Connectors
- 1 Year Warranty
- Made in the USA
- Indoor version of the Bi-directional Amplifier
- 110/220 VAC Power Supply
