Canopy HotZone solutions enable seamless mobility across the network with Nomadic Zone Point modules. Featuring the same highperformance radios as the Outdoor Zone Point modules, Nomadic Zone Points are optimized for mounting in vehicles and can be integrated with optional GPS receivers. Nomadic Zone Points extend the mesh by wirelessly linking to other network Zone Points to expand the coverage area and provide WiFi access in environments such as commuter trains and buses.

 

Wireless
 
• IEEE 802.11b/g
• Frequency band: 2.4-2.483 GHz
• Modulation:
    - 802.11g - OFDM (64-QAM, 16-QAM, QPSK, BPSK)
    - 802.11b - DSSS (DBPSK, DQPSK, CCK)
 
RX Sensitivity
 -100dBm @ 1 Mbps
-95dBm @ 2 Mbps
-93dBm @ 5.5 Mbps
-91dBm @ 11 Mbps
-94dBm @ 6 Mbps
-93dBm @ 9 Mbps
 -92dBm @ 12 Mbps
-89dBm @ 18 Mbps
-86dBm @ 24 Mbps
-83dBm @ 36 Mbps
-78dBm @ 48 Mbps
-76dBm @ 54 Mbps
 
• Transmit and Receive Diversity
 
Networking
 
• TCP and VPN session persistent roaming
• Full 802.11b/g client compatibility
• NAT support
• Layer 2 and Layer 3 support
• DHCP Server and Relay
• Sub-interface support
• Two (2) 10/100 Base-T Ethernet ports (Management and CPE connection)
• Two (2) Type-A USB ports
• Console port (for factory use) and Serial port
 
Management
 
• HTTPS to on-board configuration management tools
• Secure local and remote configuration via HTTPS
• SNMP V2c
• HotZone MIB
• Browser-based management tool
• Simple configuration save and restore
• Network & client monitoring and statistical capture features
 
Environmental
 
Operating temperature range
 -40°C to 70°C (-40°F to 158°F)
 
Storage temperature range
 -40°C to 85°C (-40°F to 185°F)
 
Humidity
 95% (non-condensing)
 
Shock & vibration
 MIL-STD-202E, Method 204C
 
Watershed against casual rain
 IP Level 1 (water)
 
Security
 
• WPA - Wi-Fi Protected Access (64, 128, 152-WEP with TKIP)
• Multiple ESSIDs
• Full VPN compatibility
• VPN filtering—rejects non-VPN traffic
• MAC address access control lists
• HTTPS only to on-board management tools
• AES encryption
• Packet filtering
• ESSID suppression
 
Approvals
 
• FCC CFR 47 Part 15, Class B
• Industry Canada RSS 210
• UL 60950-1
• CSA 22.1 No. 950
• EN 60950
• IEC 950
 
Hardware
 
• Autosensing 10/100 BaseT Ethernet
• Power input:
   - 10.0 to 32.0VDC
   - power consumption: 8W typical
• Polarity protection
• Low voltage disconnect protection
• Automotive over-voltage protection, SAE J1211
• Automotive mini-blade fuse and socket, externally accessible
• Network status lamp
• Remote network status indicator
• Dimensions:13.1 in (33.3 cm) wide x 7.91 in (20.1 cm) deep x 3.85 in (9.8 cm) high
• Weight: 9 lbs (6.35 kg) max., with mounting brackets
 
Optional Accessories
 
• Antenna kit: one (1) 7.4dBi flexible spring base omni-directional antenna, vehicle-mount bulkhead or magnetic mount N-connector, 12’ of low-loss antenna cable
• Antenna kit: one (1) 5.0dBi omni-directional antenna, vehicle-mount bulkhead or magnetic mount N-connector, 12’ of low-loss antenna cable
• GPS Receiver with external puck antenna
 
Mounting Options
 
Vehicle mounted in protected area such as trunk or cargo space
 Vertical or Horizontal mounting orientation
Protection Circuits
 
Antenna Protection
 ≤ 0.5μJoule for 3kA @ 8/20μS Waveform
 
Electrical Protection
 EN61000-4-5 Level 4 AC Surge Immunity
 
Data Protection
 EN61000-4-2 Level 4 ESD Immunity